Suse® linux enterprise server 9 (x86_64) update, Sp3 update, Suse – Dell POWEREDGE R805 User Manual

Page 9

Advertising
background image

Information Update

7

8 Insert a different SD card or USB key that you know works properly.
9 Close the system. See "Opening and Closing the System" in the

Hardware Owner’s Manual.

10 Reconnect the system to the electrical outlet, and turn on the system

and attached peripherals.

If the problem is not resolved, proceed to the next step.

11 Repeat step 2 and step 3.
12 Remove the expansion cards from the appropriate expansion-card riser—

riser 1 for an SD card problem or riser 2 for a USB memory key problem.
See "Removing an Expansion Card" in the

Hardware Owner’s Manual.

13 Reseat the expansion-card riser in its socket. See "Expansion-Card Risers"

in the

Hardware Owner’s Manual.

14 Reinstall the expansion cards you removed in step 12.
15 Close the system. See "Opening and Closing the System" in the Hardware

Owner’s Manual.

16 Reconnect the system to the electrical outlet, and turn on the system and

attached peripherals.

If the problem is not resolved, see "Getting Help" in the

Hardware Owner’s

Manual.

SUSE

®

Linux Enterprise Server 9 (x86_64) Update

SP3 Update

SATA optical disk drives are not supported by SUSE Linux Enterprise Server
service pack 3 (SP3). The following error messages may appear when
attempting to install the operating system from a SATA optical disk drive:

cannot read media

device not mounted

To resolve this issue, install the operating system from the network or from an
external USB optical drive. Support for SATA optical drives will be provided
in SP4.

Advertising