Dell Dimension 4300S - Manual (Page 24)

1. Ensure that all cables are connected, and fold cables out of the way. Do not route cables over the drive cage—they can prevent the cover from closing
properly.
2. Ensure that no tools or extra parts are left inside the computer.
3. Pivot the cover down and ensure that the release buttons click into place.
4. Attach the computer stand (optional).
5. Connect your computer and devices to their electrical outlets, and turn them on.
Back to Contents Page
NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.