Dc power connectors, Power supply dc connector pin assignments, Dc power connector p1 – Dell Dimension 4300S User Manual
Page 46
DC Power Connectors
Power Supply DC Connector Pin Assignments
DC Power Connector P1
+5 VFP
+/–5%
0.0
2.0
1
Outputs meet and do not exceed SELV requirements per electrical standards (UL 1950, IEC 950, or EN60950 Par. 2.3).
2
Maximum continuous combined load on +5 VDC and +3.3 VDC outputs do not exceed 80 W.
3
+5 VDC minimum load is 0.2 A when there is a minimum load of 0.3 A on the +12 VDC and 0.42 A on the +3.3 VDC outputs simultaneously. +5 V minimum
load is 1 A for load transient tests.
4
In system configurations where +3.3 VDC is not used, all other outputs stay within regulation while the +3.3 VDC output is in a zero load condition.
Pin Number Signal name 18-AWG Wire
1
+3.3 VDC
Orange
2
+3.3 VDC
Orange
3
COM
Black
4
+5 VDC
Red
5
COM
Black
6
+5 VDC
Red
7
COM
Black
8
POK
1
Gray
9
+5 VFP
Purple
10
+12 VDC
Yellow
11
+3.3 VDC
Orange
12
–
12 VDC
1
Blue