Dell PowerEdge C8000 - Manual (Page 14)

14 Installation Guide
13 Connect the power cables to the MIC card. Ensure the cables are properly attached.
See Figure 1-19 for the cable routing diagram.
Figure 1-16. Connecting the Power Cables
14 Align and insert the MIC card assembly into the back GPGPU card riser connector until the
card is fully seated.
15 Secure the MIC card to the back of the sled cover using the four M3 screws, working in a
clockwise sequence. Tighten the screws to 5.21 in-lb.
Figure 1-17. Installing the Back MIC Card Assembly
1, 2 power cables
1 M3 screws (4) 2 Xeon Phi 7120P MIC card assembly
3 back GPGPU card riser
1
2
1
2
3
C8220X_MIC5110P7120P_IG.book Page 14 Monday, August 12, 2013 5:42 PM