Dell PowerEdge C8000 - Manual (Page 7)

Installation Guide 7
Installing the Front Xeon Phi 5110P/7120P MIC card
1 Remove the four M3 screws securing the air baffles.
2 Lift the air baffles out of the sled cover.
Figure 1-2. Removing the Air Baffles
3 Remove the four M3 screws securing the mounting brackets.
4 Lift the mounting brackets away from the GPGPU blank. Save the mounting brackets.
5
Lift the GPGPU blank out of the sled cover. Save the GPGPU blank for future use.
Figure 1-3. Removing the Mounting Brackets and GPGPU Blank
1 M3 screws (4) 2 right air baffle
3 left air baffle 4 GPGPU blank
1 M3 screws (4) 2 front mounting bracket
3 back mounting bracket 4 GPGPU blank
1
2
3
4
1 2
3
4
C8220X_MIC5110P7120P_IG.book Page 7 Monday, August 12, 2013 5:42 PM