Dell PowerVault DP500 - Manual (Page 11)

Getting Started
11
DPM Prerequisites
Before you run Microsoft
®
System Center Data Protection Manager (DPM)
2007 for the first time, these prerequisites apply:
• The system must be on a network and have a valid IP address.
• The system must be a member of a domain.
• The user must be logged on as a domain user, and that domain user must
be a member of the local administrator group.
At initial login, the PowerVault Data Protection Solution Configuration
Wizard starts up automatically. Exit the wizard to configure your system to
meet the prerequisites above. The following sections in this document guide
help you complete these tasks.
Figure 1-5. PowerVault Data Protection Solution Configuration Wizard Welcome
Screen
Rack Installation
For rack mountable systems, see the Rack Installation Instructions or Rack
Installation Guide included with your rack solution for information on how to
install your system into a rack.