Dell PowerVault DP500 - Manual (Page 34)

34
Configuring DPM
a collection of storage that DPM uses to protect the managed servers in your
network. For more information about storage pool, refer to “Adding Disks to
the Storage Pool” in Deploying System Center Data Protection Manager 2007.
Figure 3-7. Configuring the DPM Storage Pool
After the storage pool is successfully configured, the wizard displays a
message showing the completed steps. When Finish is chosen, the DPM
2007 Administrator Console is launched. Use the DPM Administrator
Console to add servers from your network. Refer to “"DPM Deployment" on
page 39” for more information.