Dell Open Print Driver - Manual (Page 11)

Dell Open Print Driver Version 1.9 11
PRINTERADDRESSES =
”Printer Name,Driver
Name,Port Name;…”
PRINTERADDRESSES =
“@path”
Install a static printer object for the printers at
each of the given addresses. The addresses of the
printers to be created may be specified as a
semicolon ‘;’ separated list, while Printer Name,
Driver Name and Port Name are separated by a
comma ‘,’.
Each printer object consists of 3 parameters, the
Printer Name, Driver Name and Port Name.
The ‘Printer Name’ is the name of the printer
object to be created.
The ‘Driver Name’ is the parameter, can be either
a number (1=PCL5,2=PCLXL,4=PS) or the actual
driver name “Dell Open Print Driver (PCL 5)” or
“Dell Open Print Driver (PCL XL)” or “Dell Open
Print Driver (PS)”
The ‘Port Name’ is the parameter, is either an IP
Address (192.168.1.124) or a Queue Name. For
e.g. \\SERVER\Dell2355.
The addresses of the printers to be created may
be specified as a full file system path to an ANSI
text file containing a list of printers.
For e.g. Content of c:\myprinters.txt:
My Dell 7330dn (PCL5),1,192.168.1.18
My Dell 5130 (PCLXL),2,192.168.1.22
My Dell 7130dn (PS),4,192.168.1.15
My Dell 2355 (PS) via
TESTSERVER,4,\\TESTSERVER\Dell2355
A reference to a file path is marked by a leading
‘@’. The path must be an absolute path, and may
be a local path (such as “@c:\myprinters.txt”) or
a UNC path referring to a network location (such
as “@\\Server\InstallFolder\myprinters.txt”).
If the printer at a given address is a known and
supported Dell printer, the static printer object
will be created as the appropriate model.
Otherwise, it will be created as a generic laser
printer.If the specified printer is not accessible