Dell Studio 1535 (Mid 2008) User Manual

Page 40

Advertising
background image

40

Troubleshooting

E

XTENDED

MEMORY

SIZE

HAS

CHANGED

The amount of memory recorded in

NVRAM does not match the memory installed in the computer. Restart the
computer. If the error appears again, contact Dell.

T

HE

FILE

BEING

COPIED

IS

TOO

LARGE

FOR

THE

DESTINATION

DRIVE

The file

that you are trying to copy is too large to fit on the disk, or the disk is full. Try
copying the file to a different disk or use a larger capacity disk.

A

FILENAME

CANNOT

CONTAIN

ANY

OF

THE

FOLLOWING

CHARACTERS

: \ / : * ? “ <

> | —

Do not use these characters in filenames.

G

ATE

A 2 0

FAILURE

A memory module may be loose. Reinstall the memory

modules and, if necessary, replace them.

G

ENERAL

FAILURE

The operating system is unable to carry out the

command. The message is usually followed by specific information—for
example, Printer out of paper. Take the appropriate action.

H

ARD

-

DISK

DRIVE

CONFIGURATION

ERROR

The computer cannot identify the

drive type. Shut down the computer, remove the hard drive, and boot the
computer from a CD. Then, shut down the computer, reinstall the hard drive,
and restart the computer. Run the Hard Disk Drive tests in the Dell
Diagnostics (see "Pre-Boot Self Assessment (PSA) Diagnostics and Dell 32 Bit
Diagnostics" on page 33).

H

ARD

-

DISK

DRIVE

CONTROLLER

FAILURE

0 —

The hard drive does not respond

to commands from the computer. Shut down the computer, remove the hard
drive, and boot the computer from a CD. Then, shut down the computer,
reinstall the hard drive, and restart the computer. If the problem persists, try
another drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see
"Pre-Boot Self Assessment (PSA) Diagnostics and Dell 32 Bit Diagnostics" on
page 33).

H

ARD

-

DISK

DRIVE

FAILURE

The hard drive does not respond to commands

from the computer. Shut down the computer, remove the hard drive, and
boot the computer from a CD. Then, shut down the computer, reinstall the
hard drive, and restart the computer. If the problem persists, try another
drive. Run the Hard Disk Drive tests in the Dell Diagnostics (see "Pre-Boot
Self Assessment (PSA) Diagnostics and Dell 32 Bit Diagnostics" on page 33).

Advertising