Dell Studio 1535 (Mid 2008) - Manual (Page 44)

44
Troubleshooting
X : \ IS NOT ACCESSIBLE . T HE DEVICE IS NOT READY — Insert a disk into the
drive and try again.
W ARNING : B ATTERY IS CRITICALLY LOW — The battery is running out of
charge. Replace the battery, or connect the computer to an electrical outlet;
otherwise, activate hibernate mode or shut down the computer.
Lockups and Software Problems
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions that shipped with your computer.
The computer does not start
C HECK THE AC ADAPTER — Ensure that the AC adapter is firmly connected to
the computer and to the electrical outlet.
The computer stops responding
NOTICE:
You might lose data if you are unable to perform an operating system
shutdown.
T URN THE COMPUTER OFF — If you are unable to get a response by pressing a key
on your keyboard or moving your mouse, press and hold the power button for at
least 8 to 10 seconds until the computer turns off, then restart your computer.
A program stops responding or crashes repeatedly
E ND THE PROGRAM —
1 Press <Crtl><Shift><Esc> simultaneously.
2 Click the Applications tab and select the program that is no longer responding.
3 Click End Task.
NOTE:
The chkdsk program may run when you restart the computer. Follow the
instructions on the screen.
C HECK THE SOFTWARE DOCUMENTATION — If necessary, uninstall and then
reinstall the program. Software usually includes installation instructions in its
documentation or on a DVD.