Dell E5515H Monitor - Manual (Page 48)

48

Operating the Monitor
Dell E5515H
Entering Power Save Mode.
Activate the computer and wake up the monitor to gain access to the
Using the On-Screen Display (OSD) Menu.
If you press any button other than the power button, the following
messages will appear depending on the selected input:
Dell E5515H
There is no signal coming from your computer. Press any key on the
keyboard or move the mouse to wake it up. If there is no display, press
the monitor button now to select the correct input source on the
On-Screen-Display menu.
If VGA or HDMI cable is not connected, a floating dialog box as shown
below appears. The monitor will enter Power Save Mode after 5 minutes
if left at this state.
Dell E5515H
The dispaly will go into Power Save Mode in 5 minutes
No VGA Cable ?
www.dell.com/support/monitors