Canon B160 User Manual
Page 108
9-5
Periodic cleaning
9
SOLUTIONS TO COMMON PROBLEMS
K
K
Cleaning the scanner components
Follow the procedure below to periodically check and clean the scanner components.
3
Use a clean, soft, dry, lint-free cloth to
remove any ink or paper debris from the
interior of the fax (shaded area),
especially around the platen.
4
When you are finished, close the printer
cover.
5
Reconnect the power cord.
Be careful not to touch the BJ cartridge or its holder.
1
Disconnect the power cord from the fax.
2
Open the operation panel partially by
gently pulling it towards you.
3
While holding the operation panel open,
clean these components:
It only opens slightly.
• Separation guide and separation roller
Wipe with a clean, soft, dry, lint-free cloth.
• White sheet and scanning glass
Wipe with a clean, soft, lint-free cloth moistened with
water, then wipe with a clean, soft, dry, lint-free cloth.
Scanning glass
Separation guide
Separation roller
White sheet