Canon B160 - Manual (Page 91)

8-4
REPORT SETTINGS
For details on accessing the settings below, see p. 8-2.
TX SETTINGS
For details on accessing the settings below, see p. 8-2.
Name Description Settings
TX REPORT Enable/disable automatic printing of the transmission report.
OUTPUT YES: Set the fax to print an activity report every time you
send a document.
PRINT ERROR ONLY: Print only when an error occurs during sending.
OUTPUT NO: Turn off the activity report feature. OUTPUT NO/
PRINT ERROR ONLY/
OUTPUT YES
PRINT WITH IMAGE When you set TX REPORT to OUTPUT YES or PRINT ERROR ONLY,
you can add to the TX report half of the first page of the document that
was being sent. This can help remind you which document was being
sent. Valid only for memory sending. ON/OFF
RX REPORT Enable/disable automatic printing of the reception report.
OUTPUT YES: Set the fax to print an activity report every time you
receive a document.
PRINT ERROR ONLY: Print only when an error occurs during
receiving.
OUTPUT NO: Turn off the activity report feature. OUTPUT NO/
PRINT ERROR ONLY/
OUTPUT YES
ACTIVITY REPORT Enable/disable automatic printing of the activity report. -
AUTO PRINT When you set ON, your fax is set to print an activity report for every 20
transactions (sending and receiving). ON/OFF
Name Description Settings
ECM TX Enable/disable error correction during transmission. ON/OFF
MID PAUSE SET Set the length of the pause you insert into a dialling sequence. 4 seconds (1 to 15)
AUTO REDIAL Determine whether the fax will redial a number if it fails to get a
response on the first attempt. ON/OFF
REDIAL TIMES Set the number of retries. 2 times (1 to 10)
REDIAL INTERVAL Set the period of time between redialling attempts. 2 minutes (1 to 99)
TIME OUT Enable/disable automatic scanning of documents after the fax number
is entered.
When you set ON, scanning begins automatically 5 seconds after you
enter the fax number. ON/OFF