Dell P2311H Monitor User Manual
Page 22
Operating the Monitor:Dell P2211H/P2311H Flat Panel Monitor User's Guide
file:///S|/SSA_Proposal/P2211_P2311/operate.htm[7/13/2011 12:17:56 PM]
Press the
button once to return to the main menu to select another option or press the
button two or three times to exit from the OSD menu.
Icon
Menu and Submenus Description
Energy Gauge
This meter shows the energy level being consumed by the monitor in real time. When the meter is green, it indicates the monitor is
consuming low energy level. When the energy consumed increases, the meter will change to yellow and subsequently red.
Brightness Contrast
/
Use this menu to activate Brightness/Contrast adjustment.
Brightness
Brightness adjusts the luminance of the backlight.
Press the
button to increase brightness and Press the
button to decrease brightness (min 0 ~ max 100).
NOTE:
Brightness control will be greyed out during "Screen dim" in PowerNap option when screen saver is activated.
Contrast
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Press the
button to increase contrast and Press the
button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
AUTO ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with
your particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock and Phase controls under Displays Settings.
The following dialog appears on a black screen as the monitor automatically adjusts to the current input:
NOTE:
In most cases, Auto Adjust produces the best image for your configuration.
NOTE:
AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT SOURCE
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.