Viewing static routes, Adding static routes, Modifying a static route – Dell PowerVault NX3600 User Manual
Page 64: Deleting a static route, Defining file system protocols
Viewing Static Routes
Select Cluster Management → Network Management → Static Routes, the Static Routes page displays the list of
currently defined static routes.
Adding Static Routes
When defining a static route, you must specify the subnet properties and the gateway through which to access this
subnet.
1.
Select Cluster Management → Network Management → Static Routes.
The Static Routes page is displayed.
2.
Click Add.
The Add Static Routes page is displayed.
3.
From the Network list, select the network on which the subnet is accessible.
4.
In Gateway IP, enter the IP address of the gateway to the subnet that best provides access to the destination
subnet.
5.
In Destination Subnet, enter the subnet of the destination to access through a static route.
6.
In Netmask, enter the netmask to separate this subnet from other subnets.
7.
Click Save Changes.
Modifying A Static Route
1.
Select Cluster Management → Network Management → Static Routes.
The Static Routes page displays the list of currently defined static routes.
2.
From the list of existing static routes, select the appropriate static route and click Edit.
The properties of the selected static route are displayed.
3.
Modify the properties as required.
Deleting A Static Route
1.
Select Cluster Management → Network Management → Static Routes.
The Static Routes page displays the list of currently defined static routes.
2.
From the list of existing static routes, select the appropriate static route and click Delete.
Defining File System Protocols
File system protocols are networking protocols that provide file system sharing services. The NAS cluster solution acts
as a file system server by complying with the following protocols:
•
CIFS: The Common Internet File System is for Microsoft Windows users or other CIFS clients. Directories are
shared using CIFS shares.
•
NFS: The Network File System protocol is for UNIX clients or services. It works at the NFS layer. Directories are
shared using NFS exports.
The Protocol entries enable you to manage the CIFS and NFS protocols at the system level.
64