Replacing the mini-card – Dell XPS 8300 (Late 2010) User Manual
Page 34
34
Wireless Mini-Card
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Disconnect the antenna cable(s) from the Mini-Card.
4 Release the Mini-Card by pressing the clips on either side of the card.
5 Lift the Mini-Card away from the system-board connector.
CAUTION:
When the Mini-Card is not in the computer, store it in protective
antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).
Replacing the Mini-Card
CAUTION:
The connectors are keyed to ensure correct insertion. Use of
excessive force may damage the connectors.
CAUTION:
To avoid damage to the Mini-Card, ensure that there are no cables or
antenna cables under the Mini-Card.
1
antenna cables (2)
2
Mini-Card
3
clips (2)
1
2
3
book.book Page 34 Wednesday, April 25, 2012 12:34 PM