Dell XPS 8300 (Late 2010) - Manual (Page 67)

Front USB Panel 67
Replacing the Front USB Panel
CAUTION: To avoid damage to the cable connectors and the cable routing clips,
carefully slide the front USB panel into the front USB panel clamp slot.
1 Follow the instructions in "Before You Begin" on page 13.
2 Align and slide the front USB panel clamps into the front USB panel
clamp slot.
3 Replace the screw that secures the front USB panel to the front panel.
4 Connect the front USB panel cables to the system board connector
F_USB2 (see "System Board Components" on page 10).
5 Replace the front bezel (see "Replacing the Front Bezel" on page 29).
6 Replace the computer cover (see "Replacing the Computer Cover" on page 18).
7 Connect your computer and devices to electrical outlets, and turn them on.
book.book Page 67 Wednesday, April 25, 2012 12:34 PM