Dell Precision M6700 (Mid 2012) - Manual (Page 45)

Removing the Input/Output (I/O) Board
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
f. optical drive
g. primary and secondary hard drive
h. palmrest
3. Disconnect the ExpressCard module connector from the I/O board.
4. Remove the screw that secures the I/O board to the computer. Lift the right edge of the I/O board upwards to
disengage the connector and remove it from computer.
45