Heat-sink and fan assembly, Removing the heat-sink and fan assembly – Dell Precision T1500 (Late 2009) User Manual
Page 26
Advertising
Back to Contents Page
Heat-Sink and Fan Assembly
Dell Precision™ Workstation T1500 Service Manual
Removing the Heat-Sink and Fan Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
Cover
.
3.
Disconnect the heat-sink and fan assembly cable from the system board.
4.
Using a Phillips head screwdriver, loosen the four captive screws that secure the heat-sink and fan assembly to the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Advertising