Hard drive cable kit, Installing the hard drive cable kit – Dell Latitude 13 (Mid 2010) User Manual
Page 26
Back to Contents Page
Hard Drive Cable Kit
Dell™ Latitude™ 13 Service Manual
Installing the Hard Drive Cable Kit
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
ExpressCard
, if applicable.
3.
Remove the
SD card
, if applicable.
4.
Remove the
base cover
.
5.
Remove the
battery
.
6.
Disconnect both ends of the existing hard drive flex cable from the system board and hard drive connectors.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.