Plug and play capability, Flat panel specifications – Dell Crystal Monitor User Manual

Page 6

Advertising
background image

Pin Number

4-pin Side of the connector

1

VCC

2

DMD

3

DPD

4

GND

NOTE:

 The USB connector is only available for webcam.  

NOTE:

 USB 2.0 capability requires 2.0

-capable computer.  

NOTE:

The USB interface of the monitor works ONLY when monitor is powered ON (or in Power Save Mode). Switching your monitor OFF and then ON would re

enumerate its USB interface; attached peripherals may take a few seconds to resume normal functionality.

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID)
using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings, if desired.

Flat Panel Specifications

Screen type

Active matrix - TFT LCD

Screen dimensions

22 inches (22-inch viewable image size)

Preset display area:

 

Horizontal

473.76 mm (18.65 inches)

Vertical

296.1 mm (11.66 inches)

Pixel pitch

0.282 mm

Viewing angle

160° (vertical) typ, 160° (horizontal) typ

Luminance output

270 cd/m ²(typ)

Advertising