Dell Inspiron 13 (1370, Late 2009) - Manual (Page 18)

7. Using your fingertips, carefully pry up the inside edge of the display bezel.
8. Remove the display bezel.
Replacing the Display Bezel
1. Follow the procedures in Before You Begin .
2. Align the display bezel with the display panel, and snap the display bezel into place. Ensure the display and Mini-Card antenna cables route through the
hinge portion of the bezel.
3. Replace the display hinge covers (see Replacing the Display Hinge Covers ).
4. Replace the four screws that secure the display bezel to the display assembly.
5. Replace the four rubber pads that cover the display bezel screws.
6. Replace the display assembly (see Replacing the Display Assembly ).
7. Follow the instructions from step 5 to step 21 in Replacing the System Board .
8. Replace the battery (see Replacing the Battery ).
Display Hinges
1 display bezel 2 rubber pads (4)
3 screws (4)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.