Enable wireless on the projector – Dell S500 Projector User Manual

Page 74

Advertising
background image

Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:

1 Install the optional wireless dongle (Optional in S500). See "Installing the

Optional Wireless Dongle" on page 13.

NOTE:

Wireless dongle embedded for S500wi.

2 Connect the power cable to the wall outlet and press the power button.

3 Press the Menu button on your projector control panel or remote control.

NOTE:

Use

,

,

and

buttons to navigate and

to select.

4 The wireless connection default is enable. See "Wireless/LAN Settings (in

Wireless Mode)" on page 64.

5 Access the INPUT SOURCE menu, select Multuple Display and then select

Wireless Display on the sub-menu. See "INPUT SOURCE MULTIPLE

DISPLAY" on page 52.

Using Your Projector

74

Advertising
This manual is related to the following products: