Dell E2015Hv Monitor - Manual (Page 61)

Troubleshooting

61
Common Problems
The following table contains general information about common monitor
problems you might encounter and the possible solutions.
Common Symptoms What You
Experience
Possible Solutions
No Video/Power LED
off No picture • Ensure that the video cable
connecting the monitor and
the computer is properly
connected and secure.
• Verify that the power outlet is
functioning properly using any
other electrical equipment.
• Ensure that the power button is
depressed fully.
• Ensure that the correct input
source is selected via the Input
Source Select button.
• Check the “Power LED Button”
option under Energy in OSD
Menu .
No Video/Power LED
on No picture or no
brightness • Increase brightness & contrast
controls via OSD.
• Perform monitor self-test
feature check.
• Check for bent or broken pins
in the video cable connector.
• Ensure that the correct input
source is selected via the Input
Source Select menu.
• Run the built-in diagnostics.
Poor Focus Picture is fuzzy, blurry,
or ghosting • Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel
Clock controls via OSD.
• Eliminate video extension
cables.
• Reset the monitor to Factory
Settings.
• Change the video resolution to
the correct aspect ratio (16:9).
Shaky/Jittery Video Wavy picture or fine
movement • Perform Auto Adjust via OSD.
• Adjust the Phase and Pixel
Clock controls via OSD.
• Reset the monitor to Factory
Settings.
• Check environmental factors.
• Relocate the monitor and test
in another room.