Dell PowerEdge C5220 - Manual (Page 58)

58
NOTE: Parameter 192 is used for DHCP Retry by DCS requirement.
Table 1-49. SOL Command
Command NetFn CMD O/M Supported
SOL Activating Transport 20h O No
Set SOL Configuration Parameters Transport 21h O Yes
Get SOL Configuration
Parameters
Transport 22h O Yes
Table 1-50. PEF/PET Alerting Commands
Command NetFn CMD O/M Supported
Get PEF Capabilities S/E 10h M Yes
Arm PEF Postpone Timer S/E 11h M Yes
Set PEF Configuration
Parameters
S/E 12h M Yes
Get PEF Configuration
Parameters
S/E 13h M Yes
Set Last Processed Event ID S/E 14h M Yes
Get Last Processed Event ID S/E 15h M Yes
Alert Immediate S/E 16h O Yes
PET Acknowledge S/E 17h O Yes
Table 1-48. LAN Commands
Command NetFn CMD O/M Supported