Canon IMAGECLASS MF5700 - Manual (Page 74)

CHAPTER
Before Scanning 6-1
6
Scanning
This chapter briefly explains how to scan documents into your computer using the scanner
driver included in the CD-ROM.
Before Scanning
Before scanning, software must be installed on your computer.
If not, please see the Set-Up Instructions (for MF5730/MF5750 users), Set-Up
Instructions for Networking and Printing (for MF5770 users) or Chapter 1,
“Introduction” in the Software Guide.
Check if the scanner driver is installed on your computer by following this
procedure.
1
Open the [Scanners and Cameras] folder (Windows 98/Me/2000:
the [Scanners and Cameras Properties] dialog box).
● On Windows XP:
❑
Click [start] on the Windows task bar
➞ select [Control Panel] ➞ [Scanners and
Cameras].
● On Windows 98/Me/2000:
❑
Click [Start] on the Windows task bar
➞ select [Settings] ➞ [Control Panel] ➞ double
click [Scanners and Cameras].
2
Make sure there is the corresponding scanner driver name or icon.