Heat sink, Removing the heat sink – Dell Latitude E5500 User Manual
Page 22
Back to Contents Page
Heat Sink
Dell™ Latitude™ E5400 Discrete Service Manual
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
from the computer.
3.
Remove the
access panel
from the computer.
4.
Disconnect the fan cable from the system board.
5.
Loosen the five captive screws that secure the heat sink to the computer.
6.
Lift the heat sink and remove it from the computer.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.