Dell KVM 1082DS User Manual
Page 104
104
xxx
|
Using the Viewer
xxx
Web site from the target device manufacturer to determine if a later BIOS
is available that might support booting from a composite USB 2.0 device. If
so, update the BIOS and retry.
3
If the target device is not capable of booting from an external USB 2.0
device, try the following methods to remotely boot this target device:
•
Some BIOS versions provide an option to limit USB speeds. If this
option is available to you, change the USB port setting to “USB 1.1” or
“Full Speed” mode and try booting again.
•
Insert a USB 1.1 card and try booting again.
•
Insert a USB 1.1 Hub between the USB2 cable and the target device
and try booting again.
•
Contact the manufacturer of the target device for information on
availability or plans of a BIOS revision that will support booting from a
composite USB 2.0 device.