Dell PowerEdge FX2/FX2s - Manual (Page 17)

6
Technical Specifications
The aggregator is an I/O module and installed with the Dell PowerEdge FX2 server chassis for
communication.
NOTE: Replace the battery only with the same or equivalent type. Dispose of the batteries according
to the manufacturer's instructions.
Table 3. Environmental Parameters
Parameter Specifications
Operating temperature 20 °C/h (36 °F/h)
Storage temperature -40° to 158°F (-40° to 70°C)
Relative humidity
Storage humidity 5% to 95% RH with 33 °C (91 °F) maximum dew
point. Atmosphere must be non-condensing at all
times.
Maximum thermal output 475 BTU/hr
Maximum altitude
Operating
Storage
3048 m (10,000 ft)
12000 m (39,370 ft)
Table 4. Power Requirements
Parameter Specifications
Power supply 90–264 VAC 50/60 Hz
Maximum current draw per system 10A per power supply
Maximum power consumption 1920W (high Line) 900 (low line)
IEEE Standards
The aggregator complies with the following IEEE standards:
• 802.3 CSMA/CD
• 802.3u 100BaseTx
• 802.3z (1000BaseSX)
• 802.3z/ab 1000BaseT
• 802.3ap 10GBase-KR
• 802.3x flow control
Technical Specifications 17