Dell PowerEdge FX2/FX2s - Manual (Page 8)

3
Unpack the Switch
When unpacking each switch, make sure that the following items are included:
• One Dell PowerEdge FN I/O Aggregator
• One USB type A-to-DB-9 female cable
• Getting Started Guide
• Safety and Regulatory Information
• Warranty and Support Information
• Software License Agreement
Unpacking Steps
NOTE: Before unpacking the switch, inspect the container and immediately report any evidence of
damage.
1. Place the container on a clean, flat surface and cut all straps securing the container.
2. Open the container or remove the container top.
3. Carefully remove the switch from the container and place it on a secure and clean surface.
4. Remove all packing material.
5. Inspect the product and accessories for damage.
8 Unpack the Switch