Dell Alienware M11x (Early 2010) User Manual
Page 86
CHAPTER 6: SYSTEM RECOVERY
86
To restore data:
Turn off your computer.
1.
Disconnect all the devices connected to the computer (such as USB drive, printer, etc.)
2.
and remove any recently added internal hardware.
NOTE: Do not disconnect the monitor, keyboard, mouse, and the power cable.
Turn on your computer.
3.
When the Alienware logo appears, press <F8> several times to access the
4.
Advanced
Boot Options window.
NOTE: If you wait too long and the operating system logo appears, continue to wait
until you see the Microsoft
®
Windows
®
desktop; then, shut down your computer and try
again.
Select
5.
Repair Your Computer.
Select
6.
Dell Factory Image Recovery and DataSafe Options and follow the instructions
on the screen.
NOTE: The restoration process might take an hour or more depending on the size of the
data to be restored.
NOTE: For more information on Dell DataSafe Local Backup, see knowledge base article
353560 at
support.dell.com.