Using windows2000 with ausbor parallelcable, Using windows 2000 with a usb or parallel cable – Dell P1500 Personal Mono Laser Printer User Manual

Page 55

Advertising
background image

C o n n e c t y o u r p r i n t e r

5 5

7

When the Dell Drivers and Utilities screen appears, click Install to install the
additional software for your printer.

When all of the files are installed on your computer, the Congratulations screen
appears.

8

Click Print a Test Page to verify printer setup.

9

Click Finish when the test page prints successfully.

10

Close the Drivers and Utilities CD screen.

Using Windows 2000 with a USB or parallel cable

When you attached the cable and turned on the printer and computer, the Found New
Hardware Wizard screen appeared on your computer screen.

1

Insert the Drivers and Utilities CD, and then click Next.

2

Select Search for a suitable driver, and then click Next.

3

Only select Specify a location, and then click Next.

4

Browse to the location of the printer driver on the Drivers and Utilities CD.

D:\Drivers\Win_2000\

Replace D:\ with the letter of your CD-ROM drive (for example, type D:\ where D is
the drive letter of your CD).

5

Click Open, and then click OK.

6

Click Next to install the driver that is displayed.

7

Click Finish when the software is installed.

8

When the Dell Drivers and Utilities CD screen appears, choose Install to install the
additional software for your printer.

When all the files are installed on your computer, the Congratulations screen appears.

9

Click Print a Test Page to verify printer setup.

10

Click Finish when the test page prints successfully.

11

Close the Drivers and Utilities CD screen.

Advertising