Dell Inspiron 6400 - Manual (Page 118)

118
Adding and Replacing Parts
4 Install the replacement modem:
a Connect the modem cable to the modem.
NOTICE:
The connector is keyed to ensure correct insertion. If you feel resistance, check the connector and
realign the card.
b Align the modem with the screw holes and press the modem down into the connector on the
system board.
c Replace the screw that secures the modem to the system board.
5 Replace the modem cover.
Hinge Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching an unpainted metal surface (such as a connector on the back of the computer).
1 modem screw 2 modem pull-tab 3 modem connector on system
board
4 modem 5 modem cable
1
2 4 3 5
book.book Page 118 Friday, June 29, 2007 4:59 PM