Dell Inspiron 6400 - Manual (Page 69)

Setting Up a Network
69
Setting Up a Network
Physically Connecting to a Network or Broadband Modem
Before you connect your computer to a network that is not wireless, the computer must have a
network adapter installed and a network cable connected to it.
To connect a network cable:
1 Connect the network cable to the network adapter connector on the back of your computer.
NOTE:
Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is
securely attached.
2 Connect the other end of the network cable to a network connection device or a network wall
connector.
NOTICE:
Do not use a network cable with a telephone wall connector.
book.book Page 69 Friday, June 29, 2007 4:59 PM