Drives, Overview – Dell XPS/Dimension XPS Gen 2 User Manual
Page 15
3.
Press the lever on the card retention arm and raise the retention arm.
4.
Gently press the card into the AGP connector until it clicks into place, ensuring that the tab fits into the notch on the front end of the card.
5.
Lower the retention arm and press it into place, securing the card(s) in the computer.
6.
Close the computer cover
.
7.
Connect the monitor cable to the card's video connector.
8.
Connect your computer and devices to electrical outlets, and turn them on.
Drives
Overview
Your computer supports one floppy drive and a combination of up to four of the following:
l
Either two IDE hard drives or two Serial ATA hard drives
l
Two CD or DVD drives
Your computer also supports this drive combination:
l
Two Serial ATA drives in either a RAID level 0 configuration or a RAID level 1 configuration
l
One IDE hard drive
l
Two CD or DVD drives
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.