Dell LCD TV W2600 - Manual (Page 17)

18
Setting Up Your TV
www
.dell.com | support.dell.com
Using the DVI Connector
Only one connector can be used for a computer, either VGA or DVI.
1 Turn off the TV and unplug the power cord.
2 Remove the back cover from the TV by pulling the cover toward you and lifting it away.
3 Connect the white DVI cables and the audio cables.
If you are connecting a video device, use the audio connectors (red and white) of if you are
connecti ng a computer use the stereo connector (green).
NOTE:
Some cable boxes may have DVI connectors, but do not support using a DVI connection. For
more information, contact your cable TV company.
W2600e0.book Page 18 Wednesday, June 30, 2004 11:55 PM