Dell LCD TV W2600 - Manual (Page 37)

38
Troubleshooting Your TV
www
.dell.com | support.dell.com
OSD Messages
While using your TV, the following messages may appear.
Message Possible Solution
Auto Adjust No action required, the TV is performing an auto
adjustment.
Out of Range Check the optimal resolution settings.
You may need to download a new video driver. For
more information, go to support.dell.com.
No Video Input 1 Check all cables are properly connected.
2 Ensure the proper source is selected in the Input
Source menu. See "Input Select Menu" on
page 26 for more information.
TV Button Lock To unlock, press Menu on your remote control,
select Setup.
If you are unable to use the remote control, press
the volume up and the channel up buttons on the
side of the TV for 10 seconds to unlock the buttons.
In Power Save Mode
Press any key on keyboard or move mouse
If you have a computer connected to the TV and
there is no signal detected, the TV goes in to sleep
mode. The power light is amber when the TV in is
sleep mode.
Press any key on the keyboard or move the mouse to
wake the TV.
In Power Save Mode
Please Check Video Signal
If you are using a video device and it has been
inactive for 30 minutes the TV goes in to power
save mode. The power light is amber when the TV
is in power save mode.
Self Test Appears for computer source when there is nothing
plugged in. Select VGA or DVI from Input Select
menu and nothing is plugged in. Plug a computer
in to the VGA or DVI.
W2600e0.book Page 38 Wednesday, June 30, 2004 11:55 PM