Heat sink, Prerequisites, Removing the heat sink – Dell XPS 13 (L321X, Early 2012) User Manual
Page 29
Heat Sink
29
9
Heat Sink
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13.
2 Remove the power-light board. See "Removing the Power-Light Board" on
3 Remove the battery. See "Removing the Battery" on page 17.
Removing the Heat Sink
1 In sequential order (indicated on the heat sink), remove the screws that
secure the heat sink to the system board.
2 Lift the heat sink off the system board.
1
heat sink
2
screws (4)
1
2
OM_Book.book Page 29 Tuesday, September 25, 2012 2:30 PM