Installation and configuration, Unpacking the system, Locating the system electrical rating label – Dell PowerEdge M620 (for PE VRTX) User Manual

Page 3: Stabilizing the tower system

Advertising
background image

Installation And Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the server
module or enclosure.

Unpacking The System

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the
system by yourself.

Unpack the enclosure and the server module(s) and identify each item.

Locating The System Electrical Rating Label

Before setting up the system, make sure you read the electrical rating information for the system provided on the
information tag. The information tag also contains the worldwide regulatory agency marks for the system.

Figure 1. Locating the Electrical Rating Label

Stabilizing The Tower System

The tower system has four feet on its bottom panel that can be extended outward to help properly stabilize the system.
You can also replace the system feet with the optional wheels. For more information on installing the wheels, see the

Dell PowerEdge VRTX Owner's Manual

at dell.com/poweredgemanuals.

WARNING: Failure to extend the system feet outward poses the risk of having the system tip over, possibly causing
bodily injury or damage to the system.

CAUTION: Rolling the system on its wheels can cause vibrations that can damage the system.

3

Advertising
This manual is related to the following products: