Dell PowerEdge M620 (for PE VRTX) - Manual (Page 7)

Securing The Power Cable
Figure 8. Securing The Power Cable
Bend the system power cable, as shown in the illustration, and attach to the cable strap.
Plug the other end of the power cable into a grounded electrical outlet or a separate power source, such as an
uninterruptible power supply (UPS) or a power distribution unit (PDU).
Turning On The Enclosure
Figure 9. Turning On The Enclosure
Press the power button on the enclosure. The power indicator should light.
NOTE: The CMC may take a few minutes to initialize after you turn on the enclosure.
Log in to the CMC web page using the CMC IP address displayed in the LCD panel. Configure the I/O module, and map
the virtual adapters and PCIe slots to the server slots. For more information, see the
Dell PowerEdge VRTX CMC User's
Guide at dell.com/esmmanuals.
7