68 troubleshooting your projector – Dell 4310WX Projector User Manual
Page 68
68
Troubleshooting Your Projector
Lamp failure
Lamp is defective. Replace the lamp.
OFF
OFF
OFF
OFF
AMBER
Fault - DC
supply (+12V)
Power supply has been interrupted. The
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
AMBER
Flashing
OFF
OFF
AMBER
AMBER
Fault - DC
supplies
(secondary)
Power supply has been interrupted. The
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
AMBER
Flashing
OFF
OFF
AMBER
OFF
Lamp module
connection
failed
Lamp module connection may be
disrupted. Check the lamp module and
ensure that it is properly installed. If the
problem persists, contact Dell.
OFF
OFF
OFF
OFF
AMBER
Flashing