Wireless card, Removing the wireless card, Replacing the wireless card – Dell OptiPlex FX160 (Late 2008) User Manual
Page 64
Back to Contents Page
Wireless Card
Dell™ OptiPlex™ FX160/160 Service Manual
Removing the Wireless Card
1.
Perform the procedure in
Before Working on Your Computer
.
2.
Remove the hard drive bracket assembly, if installed (
Removing the Hard Drive Bracket Assembly
).
3.
Pull back the metal tab until the wireless card pops up at a 45-degree angle.
4.
Pull the wireless card out of the system board connector.
5.
Disconnect the antenna cables from the wireless card.
Replacing the Wireless Card
1.
Connect the white antenna cable to the connector marked with the white triangle, and connect the black antenna cable to the connector labeled with a
black triangle.
2.
Insert the wireless card into the WLAN connector on the system board at a 45-degree angle.
3.
Press the card downward until the metal clip snaps into place.
1
wireless card
2
metal tab
1
antenna wires
2
tab and metal mesh sleeve