Dell P1500 Personal Mono Laser Printer - Manual (Page 53)

Jam occurs as a
printed job exits the
tray Clearing a top
output bin jam
What this light sequence means:
The printer is ready to receive and process data.
The printer is in Power Saver mode.
What you can do:
Send a print job.
Press and release Continue to print the menu settings pages for a list
of current printer settings.
Press and hold Cancel to reset the printer.
NOTE: If you want to change the Power Saver setting, it can only be
set from the Local Printer Setup Utility (see Using the Local Printer
Setup Utility ).
What this light sequence means:
The printer is ready to receive and process data. In addition, the toner in the
toner cartridge is getting low.
What you can do:
Send a print job.
Press and release Continue to print the menu settings page for a list
of current printer settings.
Remove the toner cartridge and gently shake it to extend the life of
the cartridge.
Replace the toner cartridge .
Press and hold Cancel to reset the printer.