Starting the dell diagnostics from your hard drive – Dell XPS 630i (Early 2008) User Manual

Page 96

Advertising
background image

96

Troubleshooting Tools

It is recommended that you print these procedures before you begin.

NOTICE:

The Dell Diagnostics works only on Dell™ computers.

NOTE:

The Drivers and Utilities media is optional and may not ship with your

computer.

See "System Setup" on page 77 to review your computer’s configuration
information, and ensure that the device that you want to test displays in the
system setup program and is active.

Start the Dell Diagnostics from your hard drive or from the

Drivers and

Utilities media.

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on
your hard drive.

Desktop Computers

NOTE:

If your computer cannot display a screen image, see "Contacting Dell" on page 141.

1 Ensure that the computer is connected to an electrical outlet that is

known to be working properly.

2 Turn on (or restart) your computer.
3 When the DELL™ logo appears, press <F12> immediately. Select

Diagnostics from the boot menu and press <Enter>.

NOTE:

If you wait too long and the operating system logo appears, continue to

wait until you see the Microsoft

®

Windows

®

desktop; then, shut down your

computer and try again.

NOTE:

If you see a message stating that no diagnostics utility partition has

been found, run the Dell Diagnostics from the Drivers and Utilities media.

4 Press any key to start the Dell Diagnostics from the diagnostics utility

partition on your hard drive.

book.book Page 96 Friday, April 25, 2008 3:58 PM

Advertising