Pc card reader, Removing the pc card reader – Dell Precision M70 User Manual
Page 28
Back to Contents Page
PC Card Reader
Dell Precision™ M70 Service Manual
Removing the PC Card Reader
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
display assembly
.
3.
Remove the
keyboard
.
4.
Remove the
palm rest
.
5.
Remove the four M2 x 3-mm screws securing the PC card reader to the system board.
6.
Use the pull-tab to disconnect the PC Card reader connector from the system board.
7.
Lift the PC card reader straight up out of the computer.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 PC Card reader
2 M2 x 3-mm screws (4)
3 connector pull-tab