Dell Precision M70 User Manual
Page 38
Back to Contents Page
Memory Modules, Mini PCI Card, Modem, and Devices
Dell Precision™ M70 Service Manual
Memory Modules
The computer has two memory slots, DIMM A and DIMM B. DIMM A (under the keyboard) holds the basic memory module as configured from the factory. If you
did not order additional memory, DIMM B (on the bottom of the computer) is empty. If you are adding memory, you will install a memory module in DIMM B (on
the bottom of the computer under the options cover). If you are upgrading memory, you may need to install memory in DIMM A and DIMM B.
Memory Module DIMM B
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer over, loosen the two captive screws from the options cover (bottom door), and lift the cover.
3.
If you are replacing a memory module, remove the existing module.
a.
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
b.
Remove the module from the connector.
CAUTION:
Before working inside your Dell™ computer, read the safety instructions in your
Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
1
captive screws (2)
2
options cover
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
NOTICE:
Handle memory modules by their edges, and do not touch the components on a module.