Dell 5100MP Projector - Manual (Page 33)

Using Your Projector 33
Factory Reset Menu
F
ACTORY
R
ESET
—Select Yes to reset the
projector to its factory default settings. Reset
items include both computer image and video
image settings
Computer Source Menu
NOTE: This menu is only available connected to a computer.
F
REQUENCY
—Change the display data clock
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T
RACKING
—Synchronize the phase of the
display signal with the graphic card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
NOTE: Adjust the Frequency first and then the Tracking.
H
OR
. P
OSITION
—Press to adjust the horizontal position of the image to the
left and to adjust the horizontal position of the image to the right.
V
ER
. P
OSITION
—Press to adjust the vertical position of the image down and
to adjust the vertical position of the image up.