Dell 5100MP Projector - Manual (Page 51)

Specifications 51
RS232 Pin Assignment
RS232 Protocol
• Communication Settings
• Command types
To pop up the OSD menu and adjust the settings.
• Control command Syntax (From PC to Projector)
[H][AC][SoP][CRC][ID][SoM][COMMAND]
• Example: Power ON Command (Send low byte firstly)
--> 0xBE, 0xEF, 0x10, 0x05, 0x00, 0xC6, 0xFF, 0x11, 0x11, 0x01, 0x00, 0x01
• Control Commands List
Go to support.dell.com to view the latest RS232 code.
PIP combination sources
NOTE: If two sources combination overpass the bandwidth of the scaler, the
projector will show the black image.
Connection settings Value
Baud Rate: 19200
Data Bits: 8
Parity None
Stop Bits 1
Source M1
RGB
M1
Component
VGA
Computer
VGA
Component
BNC
RGB
BNC
Component
RCA
Component
HDMI
S-Video PIP PIP PIP PIP PIP PIP PIP PIP
Composite PIP PIP PIP PIP PIP PIP PIP PIP
M1 Digital X X PIP PIP PIP PIP PIP PIP