Dell B3460dn Mono Laser Printer - Manual (Page 5)

Troubleshooting
I cannot find the functions I want to secure
Make sure the application you want to secure is installed and running properly. If you want to secure a device function,
then see the Embedded Web Server Administrator's Guide.
Note: You can secure device functions only on printers that support eSF version 2.0 or later. For more information,
see
“Checking which version of the Embedded Solutions Framework is installed on a printer” on page 6 .
If you are unable to isolate the problem, then contact customer support for additional help.
Some authentication modules are missing
Some authentication modules are derived from an application or created from an internal building block. Try one or
more of the following:
• Make sure that the application is installed, configured, and running properly. For more information on configuring
an application, see the documentation that came with the application.
• Make sure the building block is configured properly.
If you are unable to isolate the problem, then contact customer support for additional help.
Function is set to an unknown state
The application function may have been set to an authentication module that the Application Access Manager can no
longer detect. Check the installation status of the authentication module application, and repair if necessary.
Troubleshooting 5