Dell 2208WFP Monitor - Manual (Page 15)

Back
Push to go back to the main menu.
Brightness Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100).
Contrast Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Exit Menu
Push to exit the OSD main menu.
AUTO
ADJUST Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
with your particular setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT
SOURCE Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
Back
Push to go back to the main menu.
VGA Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.
DVI-D Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.
Scan for
Source Push to scan for available input signals.
Exit Menu Push to exit the OSD main menu.
PRESET
SETTING Use the Preset Modes to adjust the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.